125 Kw Mold Temperature Controller Steam Heating And Tap Water Cooling
1. Eliminate floating fiber surface of glass fiber parts. Thin wall forming can improve of molding fluidity . Improve product quality and strength and reduce the injection cycle of thick wall moulding by more than 40%.
2. For electroplate parts, it can improve part mirror effect, eliminate the welding lines , reduce the crack mark of parts to be plated and the defective rate of plating production.
3. Eliminate parts stress mark, release internal stress of parts , improve rib marks of texture parts .
4. Reduce injection pressure and prolong injection machine's lifespan.
5. Eliminate hot runner mark and make injection part more perfect.
How Machine Works :
Firstly high temperature and high pressure steam are blown into mold cavity (or cavities), mold cavity temperature rises rapidly, when mold cavity temperature reaches glass transition temperature(TG)instantly. melt resins are injected into mould cavity (As mold cavity is in high temperature , the flowability of resin is good in mold cavity and easy to integrate), Then keep the pressure and cool down the mold (during the cooling down processing , vapor temperature control system simultaneously doing the miscellaneous media removal work for next production cycle) , after cooling down work done and resin is moulded . Mold will be open and the part could be taken out , thus one high glossy part with perfect surface production completed.
|JD Multi-function Mold Temperature Controlling Machine Specification|
|Rapid Heat and Cooling Mold Temperature Controlling Machine technical parameters|
|Flow rate of cooling pump||L/MIN||67||133||133||133|
|Flow rate of heating pump||L/MI N||33||33||33||33|
|Inlet/outlet of cooling||MM||DN25||DN32||DN40||DN40|
|Soften water connector||MM||DN25||DN25||DN25||DN25|
|Diverter connector||8 IN8 OUT||12 IN1 OUT||12 IN12 OUT||16 IN16 OUT|
|Dimensions including Extension pipes||MM||2030*600*1480||2030*750*1480||2030*750*1680||2030*750*1680|
|Applicable Tonnage of injection machine||T||50-300||300-800||800-2000||1000-3000|
|Machine Function||Single color or dual colors High Gloss no-welding line Moulding, front mold and rear mold temperatures are controllable, more accurate processing.|
|Optional Function||Remote failure monitoring and solving function|