Mould Water Circulating Temperature Controller Patented Water Type Steam
Patented Single Function Water type Steam Mold Temperature Controller for Injection Moulding
• Heating and cooling time is fast, Stable temperature
• Boot automatically
• LCD temperature display;
• Mold backwater function;
• Stainless steel pipes, reducing pipe and rust
• Fault alarming;
• use of imported components, long lifespan;
• Siemens Electronic Components .
JD machine’s advantages compared to similar Mold Temperature ContorIlers in industry
1. Independent R&D machine with owned intellectual property , patent#(2016211276698)(2016211589103)(2017200400855).
2. Hot steam are recyclable. Energy saving up to 35-40% compared with the direct-line equipment.
3. Machine is with multiple functions when configured with injection machine , it can realize mono color or dual color injection.
4. Machine is with two vapor outlet , these outlets may controlled front mold and rear mold randomly , injection engineer is more easy to control part warpage.
5. Machine is configured with soft water removal function . It settles cycle time increasing issue caused by pipes clogged inside mold.
6. Machine is with remote control module , it realizes remote alarming , control and monitor , this meet modern managemen requirement.
7. Machine had been certified by CE , it is only machine that is underwritten by international insurance company, it is safe and dependable. (NO.815262017000003000010)
|One Cycle Rapid Heating and Cooling Mold Temperature Controlling Machine Specification|
|Single Function Mold Temperature Controller for Injection Machines technical parameters|
|Flow rate of cooling pump||L/MIN||67||133||133||133|
|Flow rate of heating pump||L/MI N||33||33||33||33|
|inlet/outlet of cooling||MM||DN25||DN32||DN40||DN40|
|Soften water connector||MM||DN25||DN25||DN25||DN25|
|Diverter connector||8 IN8 OUT||12 IN12 OUT||12 IN12 OUT||16 IN16 OUT|
|Min. Space Requirement||MM||2030*600*1480||2030*750*1480||2030*750*1680||2030*750*1680|
|Applicable Tonnage of injection machine||T||50-300||300-800||800-2000||1000-3000|
|Machine Function||Single color high Gloss no-welding line Moulding process|
|Optional Function||Remote failure monitoring and solving function|