Single Function Mold Temperature Control Machine One Cycle Heating And Cooling
General Injeciton Issues:
1. General injection moulding issues: Shrinkage , Sliver streak , Burn marks , Rough selvedge , Vent mark, Crack , Stress mark , Floating fiber , Warpage , Welding lines Etc.
2. Crack , Stress mark , Floating Fiber , Warpage , Welding mark Etc. These issues can not be settled by injection parameters adjustment or mold structure improvement , These issues could be settled by change moulding temperature only.
3. Welding lines forming:For injection moulding , to meet injection moulding condition, Multi-direction runners are needed .During injection process, melt resin flows inside cavities, when melt resin meets the cold mold core. melt resin temperature drops gradually , at the final confluence, the melt resin does not fully coalesce due to temperature inconsistencies(below the TG point)
|JD Moulding single function Mold Temperature Controlling Machine Specification|
|Single Function Mold Temperature Controller for Injection Machines technical parameter|
|Flow rate of cooling pump||L/MIN||67||133||133||133|
|Flow rate of heating pump||L/MI N||33||33||33||33|
|inlet/outlet of cooling||MM||DN25||DN32||DN40||DN40|
|Soften water connector||MM||DN25||DN25||DN25||DN25|
|Diverter connector||8 IN8 OUT||12 IN12 OUT||12 IN12 OUT||16 IN16 OUT|
|Min. Space Requirement||MM||2030*600*1480||2030*750*1480||2030*750*1680||2030*750*1680|
|Applicable Tonnage of injection machine||T||50-300||300-800||800-2000||1000-3000|
|Machine Function||Single color high Gloss no-welding line Moulding process|
|Optional Function||Remote failure monitoring and solving function|
Company Over View
Company business range from one cycle rapid heating and rapid cooling mold temperature controlling machines R&D and manufacturing, molds design & manufacturing to Injection total solution service. JDMOULDING has make and designed more than 1000 sets RHCM molds. JDMOULDING offer customers with OEM or ODM service with competitive price.